Make a pretty wall planter

To begin with, we glued two pvc paneling panels together and then glued the finishing profiles to the sides.
Then drill the holes (larger diameter than for the dowels so that they pass through) for the gutter supports.
Stick double-sided tape on the back around and in the middle.
Stick it in the right place on the wall
Drill the wall for the gutter supports at the appropriate size for the dowels (be careful, no mollys dowels with the pvc paneling).
Attach the gutter brackets.
Close them by gluing the "clasp" (I don't know what it's called) with silicone glue, special for contact with water.
Clip the gutters into it.
Planting.

Nathalie C

Flazzy Boyet

Flazzy Boyet

Flazzy Boyet

Flazzy Boyet

Flazzy Boyet

I put gutters on pvc paneling to protect the wall from possible splashes and the whole is fixed with 16 dowels in the plasterboard wall. The whole is not very heavy, (to cut the gutters: hacksaw).

 

Regarding the plants used by Flazzy Boyet: there are classic chlorophytum (green and white), green chlorophytum, for ferns there are nephrolepis and adiantum.
At the end of the month I put an extra grow light on them because they are of course on the wall and therefore not exposed to daylight.

In addition to this, you will need to know more about it.

Here are the links:

http://www.leroymerlin.fr/v3/p/produits/gouttiere-demi-ronde-pvc-girpi-dev-25-cm-grise-l-2-m-e99572

http://www.leroymerlin.fr/v3/p/produits/support-pour-gouttiere-dev-25-gris-pvc-e160285

http://www.leroymerlin.fr/v3/p/produits/fond-unique-pour-gouttiere-demi-ronde-dev-25-ardoise-pvc-e1401433948

In addition to this, you will need to know more about it.

In addition to this, you will need to know more about it.

In addition to this, you will need to know more about it.

Thanks to Flazzy Boyet for this tip :)